GF Factory Franck Muller Watch: Genuine Product Evaluation and Quality Workmanship Comparison

Franck Muller watch,GF top watch,GF factory Franck Muller watch comparison with genuine product evaluation

GF factory Famulan collectible watches compared to genuine reviews with the difference between genuine and quality, quality, workmanship described below:

By comparing the red lines, you can see that the entire case size is exactly the same, and the font is exactly the same Genuine in the molding process missing the upper lugs of the two screws, as pointed out by the arrows

The GF does the same as the original by making the top and bottom of the dial a downward slope, trapezoidal when viewed from the side, which has to bend the lettering and increases the scrap rate of the lettering to a certain extent

On the side, you can see that the GF case is exactly the same as the original in the shape of an arched bridge, and the thickness is exactly the same crystal is curved sapphire glass.

Buckle size, engraving, and logo on the back are all identical

When comparing the cases, I found that the cutout between the lugs on top of the original case is actually flawed, and the cutout is not polished flat where it meets the curved surface of the case, and the small picture in the lower left corner shows the location of the flaws in the original case more clearly, while the GF does a better job than the original!! The original is really sorry for such an expensive price!

The "FM" logo on the GF headstock is identical to the original, as is the cog pattern on the side of the headstock and the length of the handle bar.

The entire bottom cover to do a tight fit, with the original same brushed texture processing, the bottom cover engraving glossy, font and the original consistent, the original is older so the engraving within the dirt looks darker some

I was very surprised when I opened the back cover, a closed back quartz watch without seeing the movement actually made the same deck as the original, and the deck is polished with a very beautiful Côtes de Genève pattern, and the deck is engraved with the "FM" logo in gold letters, which is a clear indication of GF's dedication to make the closed back model so special.

GF uses and original exactly the same Swiss original RONDA movement, the RONDA movement is divided into Swiss origin and the Far East (Thailand), assembly of two kinds, the Far East assembly is usually labeled as "SWISS PARTS" ", and the drill hole is no ruby; and GF is using the Original Swiss production with ruby RONDA movement, labeled as "SWISS R9", which shows the sincerity of GF, refusing to be shoddy!